WHAT WILL BE THE RESULT OF PREPARING WITH CISCO 800-150 PRACTICE QUESTIONS?

What Will be the Result of Preparing with Cisco 800-150 Practice Questions?

What Will be the Result of Preparing with Cisco 800-150 Practice Questions?

Blog Article

Tags: Practice 800-150 Exams Free, Latest 800-150 Test Fee, New 800-150 Exam Camp, Visual 800-150 Cert Exam, Braindump 800-150 Free

Using our 800-150 study braindumps, you will find you can learn about the knowledge of your exam in a short time. Because you just need to spend twenty to thirty hours on the practice exam, our 800-150 study materials will help you learn about all knowledge, you will successfully pass the 800-150 Exam and get your certificate. So if you think time is very important for you, please try to use our 800-150 study materials, it will help you save your time.

If you cannot complete the task efficiently, we really recommend using 800-150 learning materials. Through the assessment of your specific situation, we will provide you with a reasonable schedule, and provide the extensible version of 800-150 exam training you can quickly grasp more knowledge in a shorter time. In the same time, you will do more than the people around you. This is what you can do with 800-150 Test Guide. Our 800-150 learning guide is for you to improve your efficiency and complete the tasks with a higher quality. You will stand out from the crowd both in your studies and your work. The high quality of 800-150 exam training is tested and you can be assured of choice.

>> Practice 800-150 Exams Free <<

Free PDF Quiz 800-150 - Supporting Cisco Devices for Field Technicians Updated Practice Exams Free

Completing the preparation for the Cisco 800-150 exam on time is the most important aspect. The other thing is to prepare for the Cisco 800-150 exam by evaluating your preparation using authentic exam questions. PassSureExam provides the most authentic Cisco 800-150 Exam Questions compiled according to the rules and patterns supplied by 800-150.

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q74-Q79):

NEW QUESTION # 74
Drag and drop the network connectivity and management tools used to ensure connectivity from the left onto the description on the right.

Answer:

Explanation:

Explanation:
* PING# Sends ICMP echo request packets to verify connectivity
* Telnet# Allows virtual terminal connections with unencrypted traffic
* SSH# Provides secure, encrypted remote access to network devices
* IP address configuration# Requires the PC and Cisco device to be in the same subnet for direct connection These tools and their functions are covered under"Device Configuration and Verification"in the FLDTEC course:
PING:Utilized to test basic networkconnectivity using ICMP echo request/reply messages. It confirms whether a device is reachable and measures the round-trip time.
Telnet:A protocol that allows for remote device access but transmits data in plaintext, which makes it insecure. It's typically disabled by default on modern Cisco devices due to security concerns.
SSH (Secure Shell):Replaces Telnet as the preferred method for secure CLI access. It encrypts the session, protecting sensitive information such as login credentials.
IP Address Configuration:For direct device access via the same local network, both the PC and the Cisco device must be in the same subnet. This allows the use of tools like browser-based GUIs or terminal emulators when connecting directly.


NEW QUESTION # 75
What is the primary purpose of changing the configuration register when performing password recovery?

  • A. To erase the entire configuration
  • B. To ignore the startup configuration
  • C. To enable advanced debugging features
  • D. To unlock all user accounts

Answer: B

Explanation:
During password recovery on Cisco devices, the configuration register is modified to instruct the device to bypass the startup configuration stored in NVRAM. This allows administrators to access the device without being prompted for existing passwords. The standard procedure involves changing the configuration register value to0x2142, which tells the device to ignore the startup configuration during the next boot. Once access is gained, the administrator can reset passwords and then restore the original configuration by resetting the configuration register to its default value, typically0x2102.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Troubleshooting Methodologies


NEW QUESTION # 76
Which two configuration parameters are most critical to ensure optimal performance when configuring a network port for a newly installed IP phone in an enterprise environment? (Choose two.)

  • A. Link aggregation
  • B. QoS classification
  • C. Spanning Tree Protocol
  • D. VLAN assignment
  • E. Power over Ethernet

Answer: D,E

Explanation:
When configuring a network port for a newly installed IP phone, two critical parameters to ensure optimal performance are:
* VLAN Assignment:Assigning the correct VLANs is essential for segregating voice and data traffic.
Typically, a separate voice VLAN is configured to prioritize voice traffic and enhance security.
* Power over Ethernet (PoE):PoE allows the switch to supply power to the IP phone over the same Ethernet cable used for data transmission. This eliminates the need for separate power supplies and simplifies installation.
* While QoS classification (Option E) is important for prioritizing voice traffic, it is typically configured at a broader network level. Link aggregation (Option B) and Spanning Tree Protocol (Option C) are more relevant to network redundancy and loop prevention, respectively, and are not directly critical for the initial configuration of an IP phone port.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Device Configuration and Verification
===


NEW QUESTION # 77

Refer to the exhibit. What are two ways remote sites or branchesconnect to the enterprise campus network?
(Choose two.)

  • A. Ad hoc Wi-Fi network
  • B. Access layer switches
  • C. WAN links
  • D. IPsec VPN tunnels
  • E. LAN core switches

Answer: C,D

Explanation:
In enterprise networking, remote sites or branch offices connect to the central campus network using:
* WAN Links:These are dedicated communication paths that connect geographically dispersed networks. WAN links can be leased lines, MPLS circuits, or other forms of long-distance connectivity that facilitate reliable data transmission between remote sites and the main campus.
* IPsec VPN Tunnels:Internet Protocol Security (IPsec) VPNs provide secure, encrypted tunnels over the public internet, allowing remote sites to connect to the enterprise network securely. This method is cost-effective and widely used for connecting branch offices to the central network infrastructure.
Access layer switches (Option A) and LAN core switches (Option E) are components within a local network and do not facilitate remote connectivity. Ad hoc Wi-Fi networks (Option D) are temporary and lack the security and reliability required for enterprise-level remote connections.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware


NEW QUESTION # 78
How many bits are borrowed from the default host portion of the address to create subnets in a Class B network with a subnet mask 255.255.255.0?

  • A. 3 bits
  • B. 5 bits
  • C. 3 bits
  • D. 8 bits

Answer: D

Explanation:
In a Class B network, the default subnet mask is 255.255.0.0, which allocates:
* 16 bits for the network portion
* 16 bits for the host portion
When the subnet mask is changed to255.255.255.0, it becomes:
* 24 bits for the network portion
* 8 bits for the host portion
This indicates that8 bitshave been borrowed from the host portion to create additional subnets. Borrowing bits allows for the division of the original network into smaller sub-networks, enhancing organization and security within the network.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics


NEW QUESTION # 79
......

800-150 is the authentic study guides with the latest exam material which can help you solve all the difficulties in the actual test. Our 800-150 free demo is available for all of you. You will receive an email attached with the 800-150 training dumps within 5-10 minutes after completing purchase. Immediately download for the 800-150 study pdf is available for study with no time wasted. We have money refund policy to ensure your interest in case the failure of 800-150 actual test.

Latest 800-150 Test Fee: https://www.passsureexam.com/800-150-pass4sure-exam-dumps.html

Our 800-150 study materials focused on the “quality, timeliness, and cost effectiveness” concept, 800-150 Interactive Exam engines, Cisco Practice 800-150 Exams Free If you fail exam, then please email us your result scan copy and tell us your full refund request, Our 800-150 study dumps will assist you to overcome your shortcomings and become a persistent person, With the top-notch and updated Cisco 800-150 test questions you can ace your 800-150 Supporting Cisco Devices for Field Technicians exam success journey.

Press R, or click the Rotate icon in the toolbar rotate_icon.jpg, Visit Cisco and purchase your Cisco 800-150 and Supply exam product to start studying for the 800-150 exam.

Our 800-150 study materials focused on the “quality, timeliness, and cost effectiveness” concept, 800-150 Interactive Exam engines, If you fail exam, then please email us your result scan copy and tell us your full refund request.

Pass Guaranteed Cisco - 800-150 Perfect Practice Exams Free

Our 800-150 study dumps will assist you to overcome your shortcomings and become a persistent person, With the top-notch and updated Cisco 800-150 test questions you can ace your 800-150 Supporting Cisco Devices for Field Technicians exam success journey.

Report this page